The maintenance method of the bending machine mainly includes the following aspects:

1. Daily cleaning:

- At the end of each day, the bending machine should be thoroughly cleaned, especially to remove metal debris, oil and dust.

- Wipe the surface of the machine with a soft cloth or special cleaner to keep it clean and tidy.

2. Lubrication maintenance:

- Check the lubrication system of the bending machine regularly to ensure that the lubricating oil path is unimpeded.

- Change the lubricating oil regularly as recommended in the user manual to maintain the normal operation of the machine.

- Clean and replace the oil filter to prevent impurities from entering the lubrication system.

3. Mechanical parts inspection:

- Check the mechanical parts of the bending machine regularly, such as guide rails, bearings, lead screws, etc., to ensure that they are in good working condition.

- Any worn, loose or damaged parts should be repaired or replaced in a timely manner.

4. Electrical system maintenance:

- Check electrical wiring and connectors regularly to ensure their safety and reliability.

- Clean the dust on the surface of electrical equipment to maintain a good heat dissipation effect.

5. Hydraulic system maintenance:

- Check the quality and oil level of the hydraulic oil regularly, and replace or replenish it if necessary.

- Clean the oil tank and piping of the hydraulic system to prevent the accumulation of impurities and dirt.

6. Mold maintenance:

- Keep the mold clean and sharp, clean and grind regularly.

- Check the tightness of the mold to ensure that it is firmly installed to prevent loosening or falling off during bending.

7. Safety device inspection:

- Regularly check the safety device of the bending machine, such as emergency stop button, safety cover, etc., to ensure its normal function.

- Conduct safety training for operators to ensure they understand how to properly use these safety devices.

8. Regular professional check-ups:

- It is recommended to regularly ask professional maintenance personnel to carry out comprehensive inspection and maintenance of the bending machine.

- According to the use, make the appropriate maintenance plan to extend the service life of the bending machine.

By following the above maintenance methods, you can ensure the normal operation of the bending machine, improve production efficiency, while reducing failures and downtime. In addition, proper maintenance can also extend the service life of the bending machine and reduce maintenance costs.