After cleaning the bending machine, it is necessary to pay attention to the following aspects:

Check the cleaning effect:

Ensure that all parts of the bending machine are thoroughly cleaned and there is no residual dirt, oil or metal debris.

Pay special attention to check whether the key components such as guide rails, bearings and ball screws are clean.

Lubrication key components:

After cleaning, the key mechanical components of the bending machine, such as guide rails and bearings, should be lubricated as necessary.

Use appropriate lubricating oil and ensure that it is evenly applied to reduce friction and wear and extend the service life of the machine.

Check fasteners and joints:

Various parts of the machine may be touched during the cleaning process, so it is necessary to check that all fasteners and connections are secure after cleaning.

Ensure that bolts, nuts, etc. are not loose to prevent accidents while the machine is running.

Review electrical system:

Ensure that electrical wiring and connectors are not damaged or flooded during cleaning.

Check that the control panel and electrical components are working properly and there are no fault indications.

Perform functional tests:

After cleaning and inspection, the function test of the bending machine is carried out.

Ensure that the machine can start properly, run smoothly, and that all functions (such as bending, shearing, etc.) are performed accurately.

Record maintenance logs:

After each cleaning and maintenance, record it in the maintenance log.

Include information such as cleaning dates, items inspected, problems found, and actions taken to fix them to track the maintenance history and performance changes of the machine.

Pay attention to safe operation:

When re-operating the bending machine after cleaning, strictly follow the safety operation procedures.

Ensure that the operator is familiar with the various parts and functions of the machine and wears the necessary personal protective equipment.

By following the above precautions, you can ensure that the bending machine can be safely and effectively put into service after cleaning, while extending the service life of the machine and maintaining its stable performance.