The steps to clean the lubrication system of the bending machine are as
follows:
First, the preparation stage
Turn off the main power supply of the bending machine and unplug the power
plug of the machine head to ensure safe operation.
Prepare cleaning tools and materials, such as detergent, cleaning cloth,
brush, etc.
Second, the cleaning process
Make a certain concentration of detergent. The appropriate cleaner can be
selected according to the material and dirt level of the lubrication system, and
diluted according to the instructions or professional recommendations.
Pour the cleaner into the lubrication system. Ensure that the detergent is
fully covered in all parts of the lubrication system.
Activate the manual movement function of the bender to allow the cleaner to
flow through the lubrication system. This helps the cleaner dissolve and remove
dirt better.
Continue to move the function manually until there is no longer any old
lubricant in the lubrication system. This ensures that old lubricants and dirt
are thoroughly removed.
Turn off the manual movement function and drain the detergent from the
lubrication system. Be careful to drain the detergent thoroughly to avoid
residue.
Rinse the inside of the lubrication system carefully with clean water. Make
sure all cleaners and dirt are rinsed off.
Wipe the outside of the lubrication system with a cleaning cloth to ensure it
is dry and clean.
Third, subsequent operations
Check the lubrication system for damage or leaks. If any problem is found, it
should be repaired or replaced in time.
Refill with new lubricant. According to the operation instructions of the
bending machine or the advice of professionals, choose the appropriate lubricant
for filling.
Test the operation of the bending machine to ensure that the lubrication
system is working properly and without other problems.
Through the above steps, you can effectively clean the lubrication system of
the bending machine, maintain its normal operation and extend its service life.
At the same time, regular cleaning and maintenance of the lubrication system is
also one of the important measures to ensure the stable performance of the
bending machine and improve work efficiency.
MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful
city of Maanshan. The core products of the company are KMB type
electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K
type hydraulic pendulum plate machine, and so on.Official website
Address:www.kaimicnc.com
