Precautions for bending machine lubrication mainly include the following points:

Choose the right lubricant:

According to the working conditions of the bending machine and the manufacturer's recommendation, choose the appropriate lubricating oil. For example, calcium base grease is recommended for steel-backed composite bearings of each roll of the bending machine.

If you use other types of grease, ensure that its performance meets the requirements, such as the drop point is not lower than 160 ° C, and the needle penetration is in the range of 325-360.

Regular lubrication:

Lubricate regularly according to equipment instructions or manufacturer's recommended lubrication cycle.

Usually, oil should be injected to each lubrication point before each shift to ensure that the equipment is fully lubricated during operation.

Pay attention to the lubrication method:

According to the different parts and working conditions of the bending machine, appropriate lubrication methods are used, such as box lubrication, regular refueling lubrication, etc.

Ensure that the lubricating oil is evenly applied to the surface that needs lubrication.

Keep clean:

Before the lubrication operation, clean the lubrication area to ensure that there are no impurities and dirt.

The lubricating oil should be avoided during the lubrication process, and the lubricating container should be sealed after use to prevent impurities from entering.

Monitoring and adjustment:

Check the condition of the lubricating parts regularly to ensure that the lubricating oil is sufficient and effective.

If it is found that the lubrication is poor or the lubricating oil is consumed too quickly, the lubrication cycle should be adjusted in time or the lubricating oil should be replaced.

Recording and maintenance:

Records should be made after each lubrication, including lubrication time, the type and amount of lubricating oil used.

Analyze the lubrication condition of the equipment according to the records and adjust the lubrication plan in time.

Safe operation:

When performing lubrication operations, ensure that the equipment is shut down and disconnected from the power supply to prevent injury from accidental start-up.

Use appropriate tools and protective equipment for lubrication operations to ensure personal safety.

Follow the above precautions to lubricate the bending machine, which can ensure the normal operation of the equipment, extend the service life and improve the work efficiency.

MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful city of Maanshan. The core products of the company are KMB type electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K type hydraulic pendulum plate machine, and so on.Official website Address:www.kaimicnc.com