The maintenance and repair cycle of the bending machine is not fixed, but depends on the specific situation. Here are some general guidelines and suggestions:

Maintenance cycle:

Daily maintenance: Basic cleaning and inspection should be carried out after daily use.

Monthly maintenance:

The frame section of the bending machine should be cleaned and inspected monthly.

Clean and lubricate the positioning section monthly.

Replace the oil and clean the oil line every month.

Monthly electrical system inspection and maintenance.

Monthly inspection and replacement of wearing parts such as calipers, tool holders, etc.

Maintenance cycle:

Hydraulic system maintenance:

The new machine should check whether the bending of the tubing is deformed after one month of operation.

After two months of use, all fittings should be tightened.

Clean hydraulic components monthly.

The air filter on the tank is checked and cleaned every 3 months, and it is recommended to replace it once a year.

Annual or depending on usage:

The oil should be changed once a month after the new machine works, and it is recommended to change the oil once a year after that, and clean the tank.

Depending on the frequency of use, working environment and service life of the bending machine, the maintenance cycle may vary. Generally speaking, the maintenance cycle of the bending machine is about half a year to one year.

Other considerations:

Frequency of use: Frequently used bending machines may require more frequent maintenance.

Working environment: In harsh working environments (such as dust, high humidity, etc.), the bending machine may require more frequent maintenance and overhaul.

Age: As the age of equipment increases, more frequent maintenance may be required to maintain its performance and safety.

In general, the best practice is to regularly check the status of the bending machine, and adjust the frequency of maintenance and overhaul according to the actual situation. In addition, it is important to follow the maintenance and overhaul guidelines provided by the equipment manufacturer.

　　MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful city of Maanshan. The core products of the company are KMB type electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K type hydraulic pendulum plate machine, and so on.