The maintenance method of bending machine equipment can be divided into the following steps:

First, hydraulic system maintenance

Check hydraulic components for damage and replace if necessary. For example, when the oil pump is damaged or the hydraulic oil exceeds the low liquid level, the hydraulic oil should be replaced or added in time.

Clean the oil circuit, eliminate the problem of oil circuit blockage, and ensure the smooth operation of the hydraulic system.

Check whether the oil is contaminated, and regularly replace the clean oil to maintain the stability and efficiency of the hydraulic system.

Second, electrical system maintenance

Check whether the motor and electrical components are normal, if there is damage or poor contact, should be replaced or repaired in time.

Check whether the circuit contact is good, for the problem of poor circuit contact, it needs to be repaired to ensure that the current is stable.

Check whether the sensor fails, and if it fails, it needs to be replaced to ensure accurate control of the device.

Third, mechanical system maintenance

Check whether the mechanical parts are worn or damaged. Replace the parts that are seriously worn, such as bearings and transmission chains, in time to avoid affecting the performance of the equipment.

Check whether the connection is loose. If the connection is loose, tighten it to ensure device stability.

Check whether the lubrication is good, and regularly lubricate the mechanical parts to reduce wear and friction and extend the life of the equipment.

Fourth, other general maintenance measures

Replace the hydraulic oil and clean the tank regularly to keep the hydraulic system clean and stable.

Check the connection of electrical components and circuits regularly to prevent electrical system failures.

Perform comprehensive inspection and maintenance of the equipment, including lubrication, cleaning, tightening bolts, etc., to ensure the normal operation of the equipment.

To sum up, the maintenance of bending machine equipment needs to start from many aspects such as hydraulic system, electrical system and mechanical system. Through regular inspection and maintenance, potential problems can be discovered and solved in time to ensure the stable operation and extend the service life of the bending machine. At the same time, for complex failures or uncertain problems, it is recommended to ask professional and technical personnel to carry out maintenance to avoid greater losses.

MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful city of Maanshan. The core products of the company are KMB type electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K type hydraulic pendulum plate machine, and so on.