When the bending machine bends, the direction of movement of the slider mainly depends on the required bending operation. Generally speaking, it can be summarized as the following two situations:
When the bending machine bends, the direction of movement of the slider
mainly depends on the required bending operation. Generally speaking, it can be
summarized as the following two situations:
Move down:
During the bending process, the slider usually moves down to bend the
workpiece. This is because in most bending machines, the slider is designed to
move from the top dead center position to the clamping point position, and in
this process, the sheet metal is compressed and deformed, that is, the bending
process begins. When the slider reaches the bottom dead center position, the
bending operation is completed.
Level adjustment:
In addition to vertical movement, the slider sometimes needs to be fine-tuned
in the horizontal direction as well. This adjustment is usually made to obtain
the desired bending Angle. Specifically, adjusting the slider to the left a
certain distance can make the bending Angle smaller; Adjusting the slider to the
right by a certain distance will make the bending Angle larger. This adjustment
is based on the design and working principle of the bending machine and may vary
from machine to machine.
In general, the slider in the bending machine is mainly moved down to
complete the bending operation, while it may need to be fine-tuned in the
horizontal direction to obtain the desired bending Angle. This movement and
adjustment is the key to ensure the accuracy and quality of the bending.
MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful
city of Maanshan. The core products of the company are KMB type
electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K
type hydraulic pendulum plate machine, and so on.
