MAANSHAN KAlMl CNC MACHINE TOOL Co.,LTD aims to lead the development of the industry with “reasonable price”, “high quality products”, “on-time delivery”, “good reputation service” as the basic principle. "and ‘good reputation service’ as the basic guideline. We are looking forward to a win-win cooperation!
Cleaning the bending machine is an important maintenance step that helps maintain the performance of the machine and extend its service life. Here is a structured guide to the cleaning steps:
1. Preparation
Determine the cleaning cycle: according to the frequency of use and working environment of the bending machine, develop a reasonable cleaning cycle. In general, daily cleaning is performed once a day at the end of use, and deep cleaning is performed regularly (such as weekly or monthly).
Preparing cleaning tools: Collect necessary cleaning tools, such as soft cloth, soft brush, and hair dryer. Avoid using hard or sharp tools to avoid damaging the machine surface.
Disconnect the power supply: Before cleaning, ensure that the press is disconnected from the power supply to ensure safe operation.
2. Daily cleaning steps
Remove surface dirt: Use a soft cloth or brush to gently remove metal shavings, dust, and other dirt from the surface of the machine. Pay special attention to clean important parts such as molds and slide rails.
Preliminary cleaning of oil: For oil, you can use a soft cloth, soft brush for preliminary wiping, or use a hair dryer to blow away the oil. Avoid using sharp tools to scrape the oil, so as not to scratch the surface of the machine.
3. Deep cleaning steps (performed regularly)
Use cleaning agent: Select a special metal cleaning agent, dilute it according to the instructions, and wipe the bending machine with a soft cloth dipped in an appropriate amount of cleaning agent. Be careful to avoid electrical parts and sealed areas.
Clean hard-to-reach areas: For hard-to-reach areas, such as the inside of the slide rail, use a long-handled brush or jet cleaner.
Check and clean the lubrication system: Check the lubrication system regularly to ensure that the lubricating oil passage is smooth. Clean the impurities and sediments in the oil passage and replace the contaminated lubricating oil.
4. Check and maintain after cleaning
Check the cleaning effect: After the cleaning is completed, carefully check whether the parts of the bending machine are clean and no residue. Pay special attention to the cleaning of important parts such as slide rails and molds.
Record the cleaning process: Record information such as the time of each cleaning, the cleaners and tools used, and the problems found. This helps track the machine's maintenance history and spot potential problems in a timely manner.
Re-lubrication: After the cleaning is completed, add the appropriate amount of lubricating oil to the key parts of the bending machine according to the guidance of the operation manual. Ensure the use of high quality lubricants to reduce friction and wear.
5. Safety precautions
Before performing any cleaning or maintenance work, it is important to disconnect the power supply to the bending machine and ensure that the machine is completely stopped.
Avoid using corrosive or strong acid strong alkaline cleaning agents, so as not to damage the surface of the machine or internal parts.
Be vigilant during the cleaning process to avoid injury or damage to other parts of the machine.
Be vigilant during the cleaning process to avoid injury or damage to other parts of the machine.
MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful city of Maanshan. The core products of the company are KMB type electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K type hydraulic pendulum plate machine, and so on.