The maintenance frequency of the bending machine can be determined according to different maintenance items and the use of the machine. Here are some common maintenance items and their recommended frequency:

Hydraulic system maintenance:

The new machine should be changed once a month, and then once a year. The tank should be cleaned each time the oil is changed.

Check the tank oil level every month, if the hydraulic system maintenance should also be checked, the oil level below the oil window should be filled with hydraulic oil.

Cleaning and inspection:

Monthly cleaning of hydraulic components such as substrate, valve, motor, pump, tubing, etc., to prevent dirt from entering the system. Be careful not to use cleaning agents.

After using the new machine for a month, check whether the bending of the tubing is deformed, and replace it if there is any abnormality. After two months of use, the joints of all accessories should be tightened and the system should be turned off to ensure that there is no pressure on the system.

Filter maintenance:

The filter should be replaced or thoroughly cleaned each time the oil is changed.

If the bending machine has related alarms or other filter abnormalities such as unclean oil, the filter should be replaced.

The air filter on the tank is checked and cleaned every 3 months, and it is recommended to replace it once a year.

Maintenance of other parts:

Check and replace calipers, tool holders and other wearing parts regularly to ensure the normal operation and production efficiency of the equipment.

Conduct monthly inspection and maintenance of electrical system to ensure normal operation.

In addition, there are some daily maintenance work, such as:

Check the oil level in the tank weekly and also after the hydraulic system has been maintained.

Lubrication should be carried out after cleaning the ball screw and rolling guide every day to ensure that the mold is clean.

In general, the maintenance frequency of the bending machine depends on a number of factors, including the frequency of use of the machine, the working environment, and the wear of specific components. The above suggested maintenance frequency can be used as a reference, but it may need to be adjusted according to specific conditions in actual operation. Regular and proper maintenance is essential to extend the life of the bending machine and ensure its performance and accuracy.

MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful city of Maanshan. The core products of the company are KMB type electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K type hydraulic pendulum plate machine, and so on.