The operating procedures of the bending machine can be summarized as follows:

First, safety preparation:

1. Wear personal protective equipment such as safety helmet, safety glasses and dust mask before operation to ensure your own safety.

2. Wear suitable work clothes, avoid wearing too loose clothing or wearing items that may be involved in the machine, such as long necklaces.

3. Check and ensure that the machine and the surrounding environment are clean, free of debris, water stains, etc., so as not to affect the operation or cause safety risks.

Second, machine inspection:

1. Before operation, it is necessary to carry out daily inspection of the bending machine, including the lubrication system, the electrical system and the integrity of the workbench and the mold.

2. Ensure the normal operation of the lubrication system and enough lubricating oil to ensure the smooth operation of the machine.

3. Check whether the electrical system is normal, and whether each button and switch are sensitive and reliable to ensure safety during operation.

4. Carefully check whether the workbench and mold are damaged or foreign bodies, and replace or clean them in time to avoid damage to the workpiece.

Third, operation process:

1. Operate in strict accordance with the work instructions and process requirements, and shall not change the machine Settings and operating procedures without authorization.

2. Before adjusting the machine Settings, be sure to cut off the power supply and wait for the machine to completely stop running before operating to ensure safety.

3. Prepare the workpiece and fix it in the clamping device of the machine in the prescribed manner to prevent displacement during processing.

4. Calculate the bending Angle and length in advance, and adjust the distance between the upper die and the lower die to obtain accurate bending effect.

5. When starting the machine, it should be gentle and steady, and gradually increase the bending pressure to avoid equipment damage or personnel injury caused by yanking.

Fourth, precautions:

1. Operators must be familiar with the use of the machine, performance and structure, without learning or authorized personnel shall not operate the equipment.

2. During the operation, always pay attention to the position and safety protection of the workpiece, and avoid the dangerous area of the hand or body near the bending machine.

3. When replacing the mold, be sure to cut off the power supply and wait for the machine to stop running before operation. Use professional tools to replace the mold to ensure safety.

4. After the operation is complete, set the machine to zero and cut off the power supply, clean and tidy up the work site, and ensure a clean and orderly working environment.

Fifth, maintenance:

1. It is necessary to clean the bending machine after work every day, remove iron filings and debris to maintain the performance of the machine.

2. Check the lubrication system regularly and add or replace lubricating oil to keep the machine running smoothly and extend the service life.

Following the above operating procedures can ensure the safe and efficient operation of the bending machine and the machining quality of the workpiece.