Safety precautions for bending machines mainly include the following points:

Wear personal Protective equipment:

Before operating the bending machine, workers should wear appropriate personal protective equipment, including safety hats, goggles, earplugs, protective clothing and gloves, etc., to effectively prevent accidents and protect themselves from injury.

Preparation and inspection before machine operation:

Before starting the bending machine, a comprehensive inspection must be carried out, including whether the motor, switch, line and grounding are normal and firm, and whether the control parts and buttons of the equipment are in the correct position.

Check the adhesion and robustness of the upper and lower dies to ensure that the positioning devices meet the processing requirements.

Safety specifications during operation:

There should be a unified command by one person to ensure the close cooperation between the operator and the feeding and pressing personnel, and to ensure that all the cooperating personnel are in a safe position before sending the bending signal.

When the bending machine is working, the rear of the machine tool is not allowed to stand, in order to prevent collision or nip accidents.

Do not press and fold the plate at one end alone to avoid risks such as device imbalance or tilt.

During operation, if it is found that the workpiece or mold is not correct, it should be stopped immediately for correction, and it is strictly prohibited to directly correct it by hand during operation to prevent hand injury.

Out-of-specification operations are prohibited:

It is forbidden to bend the sheet material that exceeds the performance of the machine, such as ultra-thick iron plate or quenched steel plate, high-grade alloy steel, etc., to prevent damage to the machine tool or cause safety accidents.

Emergency treatment and power outage:

During the operation, if any abnormal situation occurs, stop the machine immediately to check the cause and remove the fault in time.

After the operation or in an emergency, the operation of the bending machine should be stopped immediately and the power supply should be cut off to ensure safety.

Keep the operating area clean:

During the operation of the bending machine, the working area should be ensured to be clean and safe, and debris and obstacles should be cleaned up in time to reduce the possibility of accidents.

To sum up, these safety precautions must be strictly observed during the operation of the bending machine to ensure the personal safety of the staff and the normal operation of the equipment.

MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful city of Maanshan. The core products of the company are KMB type electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K type hydraulic pendulum plate machine, and so on.