MAANSHAN KAlMl CNC MACHINE TOOL Co.,LTD aims to lead the development of the industry with “reasonable price”, “high quality products”, “on-time delivery”, “good reputation service” as the basic principle. "and ‘good reputation service’ as the basic guideline. We are looking forward to a win-win cooperation!
When the bending machine occurs during the bending process, the following steps can be taken to solve the problem:
First, shut down and disconnect the power supply
First of all, stop the operation of the bending machine immediately and disconnect the power supply to ensure safe operation.
Second, check the reason for the card material
Improper operation: Check whether it is manually dried during the bending process, resulting in the plate in the over-dry state of the bending machine stroke cannot continue, or the plate is not in place, and the plate may move. Any of these improper operations may result in a stuck down fold.
Equipment failure: The equipment may be used for a long time resulting in wear of mechanical parts or problems with the oil pressure system, such as insufficient pressure or improper invocation. These faults may cause the bending machine to break down and jam.
Quality problems of bending parts: such as the surface damage of the plate or the uneven thickness of the plate, it may also lead to the bending machine.
Third, take corresponding measures to solve the problem
To solve the problem of improper operation, it is necessary to re-correct the position of the bending part, ensure that the plate is in the correct position for downfolding operation, and pay attention to avoid manual over-drying. At the same time, make sure that the protective plate is in place to prevent the plate from moving.
If the equipment fails, the equipment should be maintained regularly, and the worn parts should be checked and replaced. At the same time, daily maintenance of the oil pressure system, timely troubleshooting, to ensure that the system works normally.
In view of the quality problems of bending parts, it is necessary to regularly test the quality of bending parts and timely deal with the problematic plates. Before bending, a reasonable plate selection should be made to avoid choosing a poor quality or unsuitable plate.
Fourth, preventive measures
In order to avoid the occurrence of stuck materials, operators can be regularly trained to improve their operating skills and safety awareness.
At the same time, a strict equipment maintenance and maintenance plan should be developed and implemented to ensure the normal operation of the equipment.
In terms of material selection, it is also necessary to strictly control the quality of the plate to avoid the card situation caused by the plate problem.
Summary: When the bending machine card material, should first stop and disconnect the power supply to ensure safety, and then check the card material cause and take appropriate measures to solve. At the same time, preventive measures such as operator training, equipment maintenance and maintenance, and strict material selection are used to reduce the probability of stuck materials.
MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful city of Maanshan. The core products of the company are KMB type electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K type hydraulic pendulum plate machine, and so on.
MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful city of Maanshan. The core products of the company are KMB type electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K type hydraulic pendulum plate machine, and so on.