Maanshan KAIMI CNC Machine Tool Co.,Ltd
免费咨询热线：400-123-XXXX
    
    
the creation world
 of the world​
全球著名的机械品牌
   
质量取胜 · 诚信文本

MAANSHAN KAlMl CNC MACHINE TOOL Co.,LTD aims to lead the development of the industry with “reasonable price”, “high quality products”, “on-time delivery”, “good reputation service” as the basic principle. "and ‘good reputation service’ as the basic guideline. We are looking forward to a win-win cooperation!


新闻中心
news center
​​
了解我们·了解较新资讯
What tools are needed for maintenance of the bending machine
Source: | Author:Ellan | Published time: 2024-09-26 | 79 Views | 🔊 Click to read aloud ❚❚ ▶ | Share:
The tools required for maintenance of the bending machine can be divided into several categories, including cleaning tools, lubricating tools, inspection tools and other special tools. Here is a list of tools organized according to these categories:

The tools required for maintenance of the bending machine can be divided into several categories, including cleaning tools, lubricating tools, inspection tools and other special tools. Here is a list of tools organized according to these categories:

What tools are needed for maintenance of the bending machine

1. Cleaning tools:

Brush: Used to clean up slag and metal debris.

Vacuum cleaner: effectively absorb the dust and small debris inside the machine.

2. Lubrication tools and materials:

Lubricating oil and grease: According to the needs of the bending machine, choose the appropriate lubricating oil or grease for lubrication maintenance.

Oil pot or oil gun: used to fuel or apply lubricating oil to the parts of the machine such as slide, slider and roller.

3. Check tools:

Electrical test instrument: Used to check the voltage and current of the electrical system to ensure the normal operation of the electrical system.

Mechanical measuring tools: such as calipers, micrometers, etc., used to check the wear and accuracy of mechanical parts.

4. Special tools:

Wrench: Used to fix the machine parts and adjust the position.

Screwdrivers: screwdrivers of various models are used to remove or install components.

Clamps: Used to hold sheet metal in place during maintenance to prevent it from moving or deforming.

5. Other commonly used tools:

Hydraulic oil: The bending machine uses a hydraulic system, so hydraulic oil is a necessity to replenish or replace the oil in the hydraulic system.

Cleaning cloth or paper towel: used to wipe the surface of the machine and clean oil.

It is very important to ensure that the correct tools are used in the maintenance of the bender and that the relevant safe operating procedures are followed. This can not only extend the service life of the machine, but also improve work efficiency and ensure the safety of the operator. At the same time, regular inspection and replacement of worn tools is also part of the maintenance work to ensure the performance and safety of tools.

MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful city of Maanshan. The core products of the company are KMB type electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K type hydraulic pendulum plate machine, and so on.