MAANSHAN KAlMl CNC MACHINE TOOL Co.,LTD aims to lead the development of the industry with “reasonable price”, “high quality products”, “on-time delivery”, “good reputation service” as the basic principle. "and ‘good reputation service’ as the basic guideline. We are looking forward to a win-win cooperation!
Bending machine maintenance needs to pay attention to the following matters:
First, cleaning and maintenance
After the end of use every day, it should be thoroughly cleaned to remove metal debris and oil, especially the bending mold, to ensure that the surface of the mold is smooth and avoid affecting the bending quality.
When cleaning, use a soft cloth or brush to avoid scratching the surface of the machine with hard objects or sharp tools.
Second, lubrication maintenance
Regularly check the lubrication system for normal operation, such as the lubrication of slide rails, cylinders and connecting rods.
Fill the oil as specified in the operating manual and ensure that the appropriate lubricant is used.
Clean and replace oil filters to maintain oil purity and fluidity.
Third, maintenance of mechanical parts
Regular inspection of various mechanical components such as spindles, gear drives and motors to ensure that they are operating properly.
Repair or replace parts in time when wear, loosening or other abnormal conditions are found.
Regularly check the tightness of fasteners to prevent accidents caused by loosening.
Fourth, electrical system maintenance
Check electrical lines, terminals and switches regularly to ensure that they are securely connected and not damaged.
Clean the dust on the surface of the electrical equipment regularly to maintain its heat dissipation effect.
When performing electrical system maintenance, be sure to cut off the power supply to ensure safety.
Maintenance of the hydraulic system (according to the information in Articles 2 and 4)
Replace the hydraulic oil regularly, the oil should be changed once a month after the new machine works, and then the oil should be changed once a year, or replaced every 4000 to 6000 hours according to the working situation. At the same time, clean the tank to keep the oil clean.
Check the tank oil level every week, and fill hydraulic oil when the oil level is lower than the oil window to ensure the normal operation of the system.
The oil temperature of the system should be controlled between 35 ° C and 60 ° C, and should not exceed 70 ° C to prevent damage to the oil and accessories.
Each time the oil is changed, the filter should be replaced or thoroughly cleaned at the same time to keep the hydraulic system clean and smooth.
Sixth, safety precautions
The operator must be familiar with the operation process and precautions of the machine to ensure safe operation.
When performing maintenance work, the power supply must be cut off and the machine must be completely stopped before operation.
Avoid touching or adjusting machine parts unrelated to maintenance during maintenance to prevent accidents.
Use proper protective equipment, such as gloves and goggles, to ensure personal safety.
To sum up, the maintenance of the bending machine needs to pay attention to cleaning, lubrication, mechanical parts maintenance, electrical system maintenance and hydraulic system maintenance. At the same time, safety is always the first, the operator should strictly abide by the safety procedures in the maintenance process.
MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful city of Maanshan. The core products of the company are KMB type electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K type hydraulic pendulum plate machine, and so on.