Adjusting the yield value of the bending machine is a meticulous process, and the following are some suggested steps for your reference:

1. Understand the meaning of the compromise value

The yield value refers to the distance of the slide back of the bending machine when the workpiece reaches the preset bending Angle in the bending process. The size of this value directly affects the bending accuracy of the workpiece and the working efficiency of the machine.

2. Determine adjustment needs

According to the bending requirements of the workpiece, the nature of the material and the performance of the bending machine, determine whether the concession value needs to be adjusted.

For example, if the bent workpiece is angled inaccurately or has indentation on the surface, it may be necessary to adjust the yield value.

3. Find the adjustment method

Consult the operation manual of the bending machine to learn how to adjust the yield value.

In general, the bending machine has a special adjustment device or parameter setting option to control the yield value.

4. Make adjustments

Mechanical adjustment:

If the bending machine is equipped with mechanical adjustment devices, such as knobs or handles, the yield value can be adjusted by turning these devices.

As needed, gradually increase or decrease the yield value, and observe the change in bending effect.

Parameter setting:

For CNC bending machines, the yield value parameters can be adjusted programmatically or through a touch screen interface.

Go to the parameter setting screen, find the options related to the yield value, and adjust them.

5. Test and verification

After adjusting the yield value, the actual bending test is performed.

Test with the same or similar workpieces and materials as before in order to accurately evaluate the adjustment effect.

Observe whether the workpiece after bending meets the requirements, such as Angle, shape and surface quality.

6. Fine tuning and optimization

Based on the test results, the yield value is fine-tuned to obtain the best bending effect.

Repeat testing and fine tuning until satisfactory bending quality is achieved.

7. Record and monitor

Record the yield value and corresponding bending effect after each adjustment for future reference and tracking.

Regular inspection and maintenance of the bending machine to ensure its stable performance, safety and reliability.

Please note that different models of bending machines may have different adjustment methods and operating procedures. Therefore, before making adjustments, be sure to consult the relevant operating manual or contact the manufacturer for accurate guidance. At the same time, caution should be exercised during the adjustment process to avoid excessive adjustment leading to machine failure or workpiece damage.

MAANSHAN KAIMI CNC MACHINE TOOL CO.,LTD is located in the beautiful city of Maanshan. The core products of the company are KMB type electro-hydraulic CNC bending machine, WC67Y, WC67K type ordinary CNC bending machine, QC11K gate shear, QC12Y, QC12K type hydraulic pendulum plate machine, and so on.